In this work, a typical pin-to-pin plasma synthetic jet in static air is excited by a pulsed DC power supply. The influences of the pulse rising time, the amplitude and the repetition frequency of the pulse voltage on the jet flow have been investigated. First, using a high-speed Schlieren imaging technique, the induced shock waves and the fast jet flow generated by the plasma synthetic jet are characterized. With a deposited energy of 44 mJ per pulse, the velocity of the shock wave and the maximum velocity of the jet flow reach 320 m s⁻¹ and 100 m s⁻¹, respectively. Second, when the applied voltage increases from 12.8 kV to 16 kV, the maximum jet velocity increases from 66 m s⁻¹ to 93 m s⁻¹. On the other hand, as the pulse rising time varies from 50 ns to 500 ns, or the pulse repetition frequency increases from 5 Hz to 40 Hz, the jet velocity induced by the plasma synthetic jet is weakly dependent. In addition, a comparative study of the plasma synthetic jets using three commercial pulsed power supplies (XJ-15, NPG- 18, and PG-30) is implemented. It reveals that the maximum jet velocity of 120 m s⁻¹ is obtained in the case of PG-30, with the longest pulse rising time and the lowest breakdown voltage, while the maximum velocity of 33 m s⁻¹ is detected in the case of NPG-18, even though it has the shortest pulse rising time and the highest breakdown voltage.

This work was partially supported by National Natural Science Foundation of China (No. 51607090), the Natural Science Foundation of Jiangsu Province (No. BK20160796), Fundamental Research Funds for the Central Universities (No. XCA17003-03), and the Delta Research and Educational Foundation (No. DREG2017008).